To enhance your outdoor spaces, you plan to proceed with front yard landscaping. Since you have sufficient financial means, you are considering building a swimming pool.

This installation serves to entertain the whole family. It offers a setting that is both relaxing, fun, and refreshing. But that’s not all, it enhances your property. A pool helps beautify your garden.

However, when placed outdoors, leaves, insects, dust, debris, and various other pollutants can dirty the water. To avoid this situation, it is essential to take appropriate measures. If you do not have a pool veranda, it is better to use a bubble cover.

Besides better protection, it plays countless interesting roles. Before asking about the pool cover price or the bubble cover sewing, it is appropriate, to begin with, to summarize in the first paragraph the essentials to remember about this cover.

What exactly is a bubble cover used for?

You may have heard of Bestway pool cover, Arebos pool cover, Werkapro pool cover France or GRE pool cover, but you don’t know what they are.

A bubble pool cover is often called a bubble cover, pool shelter, solar cover, summer cover, or solar tarp. It is a floating coating that is placed on the water of the bubble pool cover. The piece has two different sides, one of which is smooth while the other is covered with thousands of air bubbles.

These serve to catch the sun’s rays and then transform them into heat. This process is interesting because the temperature of the pool water is not only preserved but also increased, which limits heat loss, especially at night.

Besides that, bubble covers are tasked with protecting the pool from dirt and debris that accumulate in it. During the day, this installation is capable of preventing the evaporation of pool water.

Compared to pool heating systems on the market, the pool cover price is relatively affordable. Moreover, it is prized for its ease of installation. To extend its lifespan, it requires no complex maintenance.

However, given the infinite shapes and sizes of pools, finding the right pool shelter or bubble cover is a real challenge. And with the success of DIY decor, the idea of sewing bubble covers has become popular.

To save time searching for a GRE pool cover or Werkapro France pool cover that fits your pool, why not create your own pool cover yourself?

Sewing bubble covers offers unlimited customization to meet the particularities of each pool. If you don’t know how to sew bubble covers, the following passage can serve as a guide.

How to sew a bubble cover for an irregularly shaped pool?

Whatever the configuration of your pool, it is easy and quick to sew a bubble cover so that it follows its contours. For the cover to be more effective, it must be perfectly adapted to the shape and size of the bubble pool cover.

In general, there are three types of pools available on the market. There is the rectangular, oval, and round model. Thanks to the bubble tarp sewing, it is possible to manufacture custom bubble pool covers that can fit pools with atypical shapes.

If you have a rectangular pool, you only need to refer to its width and length. This allows you to effectively determine the exact size of the necessary pool cover.

For an oval-shaped pool, the design or bubble tarp sewing must be based on the measurement of the minor and major axes. These are crucial data to create a bubble cover that fits your pool.

And in the case where your pool is perfectly round, the most important information before sewing a bubble cover relates to its diameter. Try to obtain a precise and accurate value to avoid making a mistake.

If you decide to carry out the bubble tarp sewing, know that the pool cover can perfectly fit the contours of the pool. This greatly optimizes its effectiveness both in terms of protection against dirt and heat retention.

What are the practical advantages of a well-designed bubble cover?

Even before starting to sew or buy a cover, it is interesting to recall its main daily benefits. A properly adapted bubble cover ensures several essential functions:

• Water protection: limits the intrusion of dirt, leaves, and insects.
• Thermal insulation: reduces heat loss, especially at night.
• Water savings: slows evaporation, especially in summer.
• Pool durability: protects the walls and limits premature wear of the installation.
• Ease of maintenance: reduces the time needed to clean the pool.
• Energy savings: avoids or limits the use of expensive heating systems.

What solutions exist to adapt a cover to different pools?

Each pool has its configuration: rectangular, round, oval, or custom. The adaptation of a cover varies according to several criteria. Here is a brief overview of the available options:

Type of pool	Method of adapting the cover	Desired result
Rectangular	Simple cutting to width and length	Quick and precise adjustment
Oval	Measurement of minor and major axes	Well-centered and stable cover
Round	Exact diameter calculation	Good adhesion over the entire surface
Atypical shape	Custom sewing with reinforcements	Perfect edge follow-up and better efficiency
Large communal pool	Assembly by sewing several pieces	Complete and economical coverage

Which threads and needles should be used to sew a UV-resistant bubble cover?

With their interesting features, one is easily tempted by the GRE pool cover, Bestway pool cover, Werkapro pool cover France or Arebos pool cover. However, their configuration is not compatible with your pool. To solve this problem, it is necessary to cut bubble covers and then sew them.

Because of specific sizes or irregular shapes, it is difficult to find the right pool cover. The bubble tarp sewing allows you to create a cover that perfectly meets the particularities of your pool.

Many believe that this task is reserved only for specialists. However, it is within everyone’s reach if you, of course, follow the right instructions. Besides adjusting the pool cover, other reasons motivate you to sew bubble tarp.

Over the years, the cover can become damaged or torn. To extend its lifespan, sewing repairs must be made. Instead of replacing it, bubble tarp sewing is an economical option to repair only the damaged parts.

To achieve the best results, it is important to equip yourself with good tools. Threads must be chosen carefully. Prefer high-quality models. Despite their somewhat higher price, they offer great resistance to UV rays as well as water. As a result, despite bad weather and sun exposure, they are unlikely to degrade.

Similarly, the needles used must be special for bubble tarp sewing. If you use a standard needle, it is unable to handle dense or plastic materials. On the other hand, a needle designed for this task can easily and powerfully pierce a cover without damaging or tearing it.

How to sew a bubble tarp so that it is effective in terms of thermal insulation?

Whether you have a Arebos pool tarp, GRE pool tarp, Werkapro pool tarp from France or a Bestway pool tarp, know that this protective equipment acts as an insulating layer on the surface of the pool.

Thanks to its small air bubbles, it helps reduce heat loss while preserving the water temperature. Many sources confirm that it can also increase the water temperature of the pool.

By letting sunlight pass through, the air in the bubbles can warm up. Due to the heat transmitted to the water, the bubble pool tarp has the ability to capture a few extra degrees.

If it tears due to weather conditions or the test of time, it can no longer fulfill all its functions. The pool cover loses its effectiveness including its insulating quality. To restore it, do not hesitate to sew bubble tarp.

Before starting this task, give priority to preparations. This initial phase ensures the quality of the bubble tarp sewing. Moreover, it facilitates the entire process of repairing the pool cover.

To begin, try to use the appropriate materials such as resistant threads, special needles for bubble tarps, a tape measure for taking measurements, a marker to draw cutting lines, and a cutter or scissors. The latter are used to cut bubble tarp.

Once the materials are ready, the next step concerns measuring and cutting. To ensure your bubble tarp fits the pool, precise cutting must be done. The measurements obtained must also be exact.

After that, you can assemble the pieces. Before bubble tarp sewing, make sure to properly align all the cover pieces. Position them on a perfectly flat surface. Once everything is in order, you can then sew bubble tarp.

How to sew a bubble tarp without damaging the bubbles?

Even though pool bubble tarp sewing is accessible to everyone, some instructions must be followed precisely to avoid damaging the bubbles. When cutting, it is recommended to use only scissors specially designed for thick materials or a rotary cutter. This type of equipment ensures a clean and precise cut.

Before pinning the pieces of pool bubble tarp, take time to align them properly. Their edges must be perfectly straight.

To hold them temporarily, use waterproof tape or clamps. Please check their alignment before proceeding to the actual bubble tarp sewing.

To ensure the strength of the seam without damaging the bubbles, use a strong thread. Use a stitch that tolerates the risk of tearing for excellent durability over time. Among the various sewing techniques, zigzag stitching is highly recommended.

It is especially recommended for thick materials including GRE pool tarp or even Bestway pool tarp. This method offers optimal resistance and excellent elasticity.

What sewing techniques are recommended to repair a tear in a bubble tarp?

As mentioned above, zigzag stitching is among the most recommended techniques to sew bubble tarp. Whether it concerns Werkapro France pool tarp, Bestway pool tarp or Arebos pool tarp, this method consistently delivers satisfactory results.

Besides bubble tarp sewing, it can also be applied to stretch materials, voile, and many other complicated and thick fabrics. Thanks to its more atypical geometry, it combines practicality and aesthetics. This technique serves to firmly tighten the pieces ensuring the durability of the seam.

For pool bubble tarp, it prevents pool water from seeping through the seams. Make sure the thread tension is not too tight. Otherwise, the bubble tarp materials deform under the pressure of various stitches.

It is entirely possible to avoid tearing your pool cover too early. For this, it is advised to favor a first-quality bubble tarp. Prefer a model made with alveolar polyethylene. Some have UV protection treatment.

For thickness, choose one with at least 300 microns. Bubble tarps with 500 microns are the thickest, thus the most robust. As for the finish, ideally find a pool bubble tarp equipped with peripheral reinforcements.

Besides that, you can also find on the market repair kits for torn bubble tarps. They generally include a tube of glue, patches, and adhesive tapes.

If you do not know how to sew bubble tarp, you can get one. This item is often available in any hardware store or specialized shops.

How to sew a bubble tarp with a domestic sewing machine?

Whether you sew a pool bubble tarp by hand or using a sewing machine, the sewing steps are the same. The most important thing is to use a robust machine capable of sewing thick bubble tarp. If yours is not capable, it is better to do it by hand to avoid damaging it.

Indeed, there is nothing like using a sewing machine. It allows you to save time in assembling the pieces of the pool bubble cover. It is recommended to use nylon thread. This thread tolerates both water and UV rays.

As for the machine needles, they must be strong enough to easily pierce the cover. Remember that the pool shelter is made from materials that are both dense and rigid.

If you cannot find the right needles, you can use models for denim or leather to simplify the task.

To achieve a cleaner cut, your scissors must be sharp enough. If you have not yet done a bubble cover sewing, it is preferable to be accompanied by someone experienced in the matter.

How to sew reinforcements on a bubble cover to increase its durability?

If you want to extend the lifespan of your Werkapro France pool cover or GRE pool cover, please maintain it regularly. To clean it, simply use water and a soft cloth.

Avoid scrubbing vigorously, as this may crack the plastic material and then break the air bubbles. Likewise, refrain from using harsh cleaning products to avoid damaging the cover.

If you prefer to sew a bubble cover to fit your pool, know that using hems and reinforcements helps optimize its longevity.

After following all the steps of bubble cover sewing, all that remains is to finish the edges. To do this, start by making a hem. To increase the strength and durability of the pool bubble cover, insert a piece of reinforcement inside the hem. The final step is to sew it.